Leitner Wireless Headset Handset Lifter Setup

    Support › Handset Lifter Setup

    1. Plug your Leitner lifter into the large silver AUX port on the back of your charging base
    2. Unplug your telephone's handset receiver (curly cord) from your telephone base and plug it into the blue handset port on the back of your charging base
    3. Plug the green telephone cord into the green telephone port on your charging base and plug the other end into your telephone base (where your curly cord was previously connected)
    4. Remove the covering on the tape of your Leitner lifter and firmly press the lifter so it's aligned with your telephone's receiver cradle
    5. You're all set! You can now answer and end calls up to 350 feet from your phone!